★ St. Louis, Missouri · Since 1949 ★
Production plants run on hydraulics, enclosed gear drives, compressed air and electric motors. Lubri-Loy supplies the full set from one source: mineral and synthetic AW hydraulic fluids, mineral and synthetic EP gear oils, reciprocating and rotary compressor oils, R&O turbine and circulation oils, Lubri-Poly EP for electric motor bearings, Lubri-Cut semi-synthetic cutting fluid, way lubricant, Lubri-Clean cleaner/degreasers – and readily biodegradable hydraulic, gear and chain fluids for ecologically sensitive applications.
More Go. Less Gas. · Fighting friction since 1949
Lubri-Loy lowers operating costs, decreases lubrication cycles and reduces maintenance downtime.
Heavily loaded enclosed gear drives and reducers – spur, bevel, helical, herringbone and worm.
Reciprocating and rotary compressors need oils that resist carbon, varnish and sludge.
Where a leak or spill would reach soil or water, specify readily biodegradable fluids.
Catalog numbers, grades and NSF H1 registration numbers exactly as printed in the Lubri-Loy 2027 Product Catalog.
Anti-wear hydraulic and circulating fluids with thermally stable high-zinc additives. Resists sludge; anti-foam and demulsifiers separate water in the sump.
Heavily loaded enclosed gear drives and reducers of all sizes – spur, bevel, helical, herringbone and worm. Excellent oxidation and thermal stability.
Synthetic EP gear oils for enclosed spur, bevel, herringbone, helical and chain-drive gearboxes requiring an AGMA EP or AGMA S gear oil.
For single and multi-stage rotary screw, vane and reciprocating compressor crankcases and cylinders, and vacuum pumps. Extends drain intervals.
Non-soap, polyurea-thickened grease providing excellent protection for electric motor bearings. Operating range 0°F to +350°F.
Semi-synthetic metalworking fluid for critical heavy-duty machining of hard materials. Bio-inert ingredients reduce odor and biological growth. Use at 5%–10% dilution.
Non-flammable, all-in-one cleaner/degreaser that also performs as an electrical contact cleaner. High dielectric strength; safe on most plastics.
Readily biodegradable renewable-resource base oils with nontoxic anti-wear and anti-corrosion additives for mobile and industrial hydraulics.
Starting points only – always confirm viscosity / NLGI grade against your equipment OEM specification. Verify current NSF listings at nsf.org.
| Lube point | Recommended product | Catalog no. | Grade | NSF H1 reg. no. |
|---|---|---|---|---|
| Hydraulic & circulating systems – mineral AWISO 15–150; totes for ISO 32/46/68 | AW Hydraulic FluidMineral | HFAW-xxx-6405 gal. · HFAW-xxx55 gal. xxx = ISO grade · totes/bulk: see reference | ISO 15 · 22 · 32 · 46 · 68 · 100 · 150 | Non-food grade |
| Vane, piston & gear pumps – synthetic AWPer pump manufacturer | AW Hydraulic FluidSynthetic | HFAWS-xxx-6405 gal. · HFAWS-xxx55 gal. xxx = ISO grade | ISO 32 · 46 · 68 | Non-food grade |
| Mobile & industrial hydraulics – biodegradableVegetable base | Biodegradable AW Hydraulic FluidVegetable Base | HFB-xxx-6405 gal. · HFB-xxx55 gal. xxx = ISO grade | ISO 32 · 46 · 68 | Non-food grade |
| Biodegradable – temperature extremesSynthetic ester | Biodegradable AW Synthetic Hydraulic FluidSynthetic Ester | HFBS-xxx-6405 gal. · HFBS-xxx55 gal. xxx = ISO grade | ISO 32 · 46 · 68 | Non-food grade |
| Lube point | Recommended product | Catalog no. | Grade | NSF H1 reg. no. |
|---|---|---|---|---|
| Enclosed gear drives & reducers – mineral EPSelect ISO grade per OEM | Industrial EP Gear OilMineral | GO-xxx-6405 gal. · GO-xxx55 gal. xxx = ISO grade | ISO 100 · 150 · 220 · 320 · 460 · 680 | Non-food grade |
| AGMA EP / AGMA S gearboxes – syntheticSelect ISO grade per OEM | Industrial EP Gear OilSynthetic | GOS-xxx-6405 gal. · GOS-xxx55 gal. xxx = ISO grade | ISO 100 · 150 · 220 · 320 · 460 · 680 | Non-food grade |
| Where a PAG gear oil is specifiedIncompatible with other oils | Synthetic PAG Gear OilIndustrial | PAG-xxx-6405 gal. · PAG-xxx55 gal. xxx = ISO grade | ISO 220 · 320 · 460 · 680 | Non-food grade |
| Biodegradable EP gear oil (AGMA grades) | Biodegradable EP Gear OilVegetable Base · AGMA | GOBIO-xxx-6405 gal. · GOBIO-xxx55 gal. xxx = ISO grade | ISO 100 · 150 · 220 · 320 | Non-food grade |
| Lube point | Recommended product | Catalog no. | Grade | NSF H1 reg. no. |
|---|---|---|---|---|
| Reciprocating compressors (crankcase & cylinder)4,000 hour | Reciprocating Compressor Oil, 4,000 HourMineral · R&O | COM-xxx-6405 gal. · COM-xxx55 gal. xxx = ISO grade | ISO 32 · 46 · 68 · 100 · 220 · 320 | Non-food grade |
| Rotary screw & vane compressors, vacuum pumps8,000 hour | Rotary Synthetic Compressor Oil, 8,000 HourSynthetic · Ashless AW | COS-xxx-6405 gal. · COS-xxx55 gal. xxx = ISO grade | ISO 32 · 46 · 68 · 100 · 150 | Non-food grade |
| Air tools & air line lubricatorsUse where H1 is not required | Premium Air Line Lubricant – MineralMineral · Non-Food Grade | PAL-032-6405 gal. · PAL-03255 gal. | ISO 32 | Non-food grade |
| Lube point | Recommended product | Catalog no. | Grade | NSF H1 reg. no. |
|---|---|---|---|---|
| Turbines, circulating systems, non-AW hydraulicsR&O, zinc-free | Premium Turbine & Circulation OilMineral · R&O · Zinc-Free | TO-xxx-6405 gal. · TO-xxx55 gal. xxx = ISO grade | ISO 32 · 46 · 68 · 100 · 150 · 220 | Non-food grade |
| Electric motors & turbo-generators (where R&O is recommended)Not for AW applications | Premium Turbine & Circulation OilMineral · R&O · Zinc-Free | TO-xxx-6405 gal. · TO-xxx55 gal. xxx = ISO grade | ISO 32 · 46 · 68 · 100 · 150 · 220 | Non-food grade |
| Lube point | Recommended product | Catalog no. | Grade | NSF H1 reg. no. |
|---|---|---|---|---|
| Electric motor bearings0°F to +350°F | Lubri-Poly EP, #2Polyurea-Based | 2014P14 oz. · 2640P5 gal. · 2192P120 lb. | NLGI 2 | Non-food grade |
| Heavy-duty bearings, motors, couplings, conveyors-40°F to +450°F | Impact, #2Bentone Based with Moly | 201414 oz. · 26405 gal. · 2192120 lb. · 2704055 gal. | NLGI 2 | Non-food grade |
| General EP / anti-wear bearing greaseNLGI #1 or #2 | Lubri-Lith LG, #1 & #2Red Premium Lithium Complex | 1014L14 oz. · 1640L5 gal. · 1192L120 lb. · 17040L55 gal. 2014L14 oz. · 2640L5 gal. · 2192L120 lb. · 27040L55 gal. | NLGI 1 & 2 | Non-food grade |
| Severe-duty bearings-40°F to +390°F | Lubri-Lith Syn M, #2Synthetic Lithium Complex with Moly | 2014LSM14 oz. · 2640LSM5 gal. · 2192LSM120 lb. | NLGI 2 | Non-food grade |
| Wet-environment chains, gears, bearings, cables-80°F to 400°F | Lubri-Syn No. 9, #2Synthetic Hydrocarbon Grease | LS-901413.5 oz. | NLGI 2 | Non-food grade |
| Lube point | Recommended product | Catalog no. | Grade | NSF H1 reg. no. |
|---|---|---|---|---|
| Open gears & wire ropeResists slinging | Impact-G, #3Synthetic Open Gear Lube | IG-01111 oz. · IG-6405 gal. | NLGI 3 | Non-food grade |
| Chain drives & sliding surfaces where heat is present50,000 psi dry film | Lubri-Moly Dry FilmMolybdenum Disulfide Lubricant | 1001812 oz. | — | Non-food grade |
| Chains, cables & penetratingAerosol to drum | Extreme Penetrating Oil, Chain & Cable FluidIndustrial Grade | 70044 oz. · 701211 oz. · 76405 gal. · 7704055 gal. | — | Non-food grade |
| Chains & cables – biodegradable | Biodegradable Chain / Cable FluidFood Grade H1 · ISO 22 | 77041BIO55 gal. | ISO 22 | H1 reg. pending |
| Lube point | Recommended product | Catalog no. | Grade | NSF H1 reg. no. |
|---|---|---|---|---|
| Machining & grinding coolant5%–10% dilution | Lubri-Cut Heavy Duty, Semi-SyntheticConcentrated Water-Soluble Cutting Fluid | LC3-01616 oz. · diluted · LC3-1281 gal. · LC3-6405 gal. · LC3-704055 gal. | — | Non-food grade |
| Machine tool slidewaysTackified EP | Lubri-Loy Way LubricantMachine Tool Slideways | WLO-xxx-6405 gal. · WLO-xxx55 gal. xxx = ISO grade | ISO 68 · 100 · 150 · 220 | Non-food grade |
| Lube point | Recommended product | Catalog no. | Grade | NSF H1 reg. no. |
|---|---|---|---|---|
| Electrical contacts & general degreasingNon-flammable, high dielectric | Lubri-CleanHigh-Performance, Non-Flammable Cleaner & Degreaser | 1602016 oz. | — | Non-food grade |
| Metal parts degreasingNon-chlorinated, quick dry | Lubri-Clean Tri-FreeNon-Chlorinated Cleaner & Degreaser | 16020TF14 oz. | — | Non-food grade |
| Assembly & run-in | Lubri-Moly Dry FilmMolybdenum Disulfide Lubricant | 1001812 oz. | — | Non-food grade |
| V-belts & flat belts | Synthetic Belt DressingFood Grade, H1, Synthetic | 801310 oz. | — | H1 reg. pending |
Request the full guide (PDF)Includes the complete product reference and SKU consolidation worksheet.
One supply partner for every lubrication need.
Working directly with NSF International, Lubri-Loy ensures its products maintain proper H1/3H registration. NSF H1 lubricants are formulated for incidental food contact – search nsf.org by registration number to verify.
“We offer interchange products for 95% of aerosols, greases and bulk oils – eliminating the need to carry excessive SKUs of similar products.”
Lubri-Loy 2027 Product CatalogFree plant lubrication survey
Every manufacturing facility is unique. A Lubri-Loy representative will customize a lubrication program based on your needs – eliminating inventory duplication and obsolescence, correcting minimums and maximums, re-establishing reorder points and implementing a single-source managed-inventory concept.
Prefer to talk? Call 636-561-5007 · lubriloy.com · customercare@lubriloy.com
